For the curious: you do not need any of this to run a dishwasher.
Back to devices.
At a glance
| Item | Reports | Keeps to itself |
|---|---|---|
| Dishwasher (Samsung) | Cycle state, power in watts, energy in kWh | Which part of the cycle it is in, from power alone |
| Range (Samsung) | Oven state and mode, temperature and setpoint, door, a second cavity | Any signal that a burner is on |
| Washer and dryer | Power and energy | Cycle details beyond power |
| Refrigerator (LG) | Door, power saving and sabbath modes, energy yesterday, water filter state, the maker’s own alerts | A measured temperature. It reports setpoints only |
All of these arrive through the makers’ clouds. A cloud outage can freeze the last value with nothing saying it is old.
What we do with them
- Cycle done. When the dishwasher’s running sensor goes off after being on, the house announces it once, with a repeat suppression window.
- Oven left on. An alert with a button to turn it off. On this range the button cannot act, because the range has no switch the house can use, and it tells you to go turn it off. Naming a switch changes that.
- Fridge door. The door alert fires when the door is left open.
- Water filter. The fridge reports a state that includes “replace”. The house pushes once per replacement and re-arms when the filter is changed.
- A fridge that may have stopped. With no temperature to read, it checks yesterday’s energy once a day: under 1,000 Wh, about 30 percent of a normal day of roughly 3.5 kWh, is a proxy for “the compressor may have stopped.” A reading that has not been written for 26 hours also pushes. We had not confirmed on the live fridge that its energy figure is rewritten every day even when it does not change.
Known limit: the cooktop
This range reports no cooktop signal at all. We built a cooktop alert, found it could never fire, and removed it. A cooktop alert needs a signal first, for example a power or heat sensor on the cooktop circuit.
Ask your assistant
What was the fridge's daily energy over the last month, and was any day unusually low?
Your assistant reads the daily figure against the fridge's own normal. A low day is a reason to look, not a diagnosis.