Join the waitlistJoin
Life Lever Home

What do you want lifelever to help with?

Not sure? Start with your own AISee all levers

More coming: finance, work, parenting.

Home

Rain delay

Watering pauses after rain that was seen to fall, never because rain was predicted. How long it pauses is worked out from how much fell and how warm it is.

For the curious: you can leave a lawn on a plain timer and it will mostly work.

The rule

A forecast is a guess about tomorrow. Pausing a watering schedule on a guess is the risk we ruled out. The owner of this house put it plainly: they did not want a delay to trigger because rain was predicted, only during or after rain.

So the delay watches what rain did, from two sources:

What the weather says now

A National Weather Service station's current condition, not its forecast. Rain has to hold for 3 hours before it counts, so a passing shower does not start a multi-day pause.

A rain gauge

An amount, in inches. Each time the 24-hour total rises to 0.10 in or more, the pause is pushed out. 0.10 in is where a rain day starts in the EPA's WaterSense program.

A station some miles away is good enough. Rain that is enough to skip a whole night of watering has fallen over a wide area, and a little scattered shower is nothing against a 7-hour watering night.

The pause grows with the rain and shrinks with the heat

A fixed three days is wrong both ways. A quarter inch in July is gone in a day, and two inches in January keeps the soil wet for weeks. So when a temperature is available, the pause is how long the rain would take to be used up:

Pause in days = rain that reaches the roots, divided by what the plants use in a day.

The rain that counts is 80 percent of what fell, up to the most the root zone can hold. Plant use is a straight line in temperature, with a winter floor, and is scaled to the thirstiest plant being watered.

Every number is a setting. These defaults are research values, not measurements of our soil:

Setting Default Where it comes from
Share of rain that reaches the roots 0.8 Irrigation Association and EPA WaterSense guidance
Most the root zone holds 1.8 in 3 ft of root depth, 1.2 in of water per foot, half of it usable
Plant water use 0.65 times the reference FAO-56 table for mature citrus, about 70 percent canopy
Reference use a line in temperature A fit of monthly values for one California climate zone against mean temperature
Winter floor 0.04 in a day Stops a cold reading stretching the pause toward forever
Longest pause 21 days However much rain or however cold

If your climate is different, the temperature line is refitted for it.

Pauses this gives, in days

For mature citrus, when the gauge reading has just crossed the threshold:

Temperature 0.25 in 0.5 in 1 in 2 in
55 F 3.0 6.0 11.9 21 (capped)
65 F 1.9 3.9 7.7 15.5
75 F 1.4 2.9 5.7 11.5
85 F 1.1 2.3 4.6 9.1

At 62 F, 1 inch gives about 8.7 days. Rain beyond 2.25 inches adds nothing, because the root zone is full and the rest drains below it.

The temperature used is a 7-day average and not the reading of the moment.

Details that matter

  • One pause for every valve. All five valves share one “resume watering after” time. The thirstiest plant governs it: mature citrus here, where rosemary would tolerate far longer. A shared pause should not outlast the plant that dries out first.
  • It only ever extends. A later or larger rain can push the date out. Nothing can pull it earlier, so two rain events never undo each other.
  • It ends one pause after the last rain, not after the first, because each rise in the gauge moves the date again.
  • Continuous rain keeps it going. Every hour while rain is still reading, the pause is pushed out again, and after a restart of Home Assistant a rain already under way is picked up.
  • One notification per pause. Each rise of the gauge extends the date but only the first sends a push. A bucket that tips dozens of times in a storm would otherwise page a phone dozens of times.
  • It can only pause. It never starts watering and never touches a valve.

When a source goes quiet

If the weather source is unavailable, rain never counts and the delay never starts its clock. If the gauge or its threshold is unreadable, the gauge path does nothing, and the first reading after such a gap is not treated as a rise. If the temperature cannot be read, the fixed number of days is used and the notification says so.

In every case watering simply carries on with whatever pause it already had. That is the safe direction: the worst result is a watering night that rain would have made unnecessary.

Ask your assistant

How many nights of watering did rain cancel this season, and how much water did that save?

Your assistant counts the pauses in your record, multiplies by what a normal night uses, and says what it assumed.

There is also a post about why we chose this: Why our rain delay ignores the forecast. Back to watering.

Bring your house

Years of house history, and schedules you set by chat.

Home needs a Home Assistant you already run. Setup in the beta is assisted: we set it up with you, one house at a time.

Join the waitlist