For the curious: you do not need any of this to ride.
Life Lever Moto reads a bike through a small Bluetooth data connector in its diagnostic plug, then shows the data on your phone and records it with your ride. These are the bikes we have read ourselves.
Each bike speaks its own language, and the write-ups say which one and what we can get out of it. The full detail is on the two bike pages: KTM 300 XC-W TBI and Triumph Sprint ST 955i.
The bikes
KTM 300 XC-W TBI
Years we have read: 2025 and 2026
Engine computer: Vitesco M4C
Plug: KTM 6-pin, the clear one
Language: CAN, 500 kbit/s
Live data: rpm, throttle, coolant, power valve, heard from what the engine broadcasts
Fault codes: stored and pending
Clearing codes: off on this bike
VIN: yes
Triumph Sprint ST 955i
Year we have read: 2004
Engine computer: Sagem MC1000
Plug: standard 16-pin
Language: K-line, slow wake-up
Live data: 15 standard live values, rpm, speed, throttle, coolant and more
Fault codes: stored and pending
Clearing codes: yes, in the app, with a confirm
VIN: no
Clearing a code does not fix the fault. On a bike we have not read yet, the app tries the standard diagnostic channel and shows which values your bike answers.
The protocols, in plain words
A bike’s engine computer (the ECU) talks over one of a few wiring styles. The data connector has to match the bike, and it works out which one by trying them.
- K-line. One wire, older bikes, 10400 baud (slow, like an old modem). Two dialects sit on it, ISO 9141-2 and KWP2000 (also called ISO 14230). The ECU has to be woken first. Slow init sends the wake-up at 5 baud, a bit at a time, and the ECU answers. Fast init is a short pulse. Which one a bike wants is something you find out by trying; the Triumph wants slow, and refuses fast.
- CAN. Two wires, newer bikes, fast (250 or 500 kbit/s). Every message carries an id, 11 bits long on most bikes and 29 on some. There is no wake-up step. On the KTM, CAN is also how we get live data: the engine computer broadcasts a few messages many times a second whether anyone asks or not, and we listen.
- The standard diagnostic channel. A standard set of questions that works over either wiring. Mode 01 asks for live values (each one a numbered PID), mode 03 asks for stored fault codes, mode 07 for pending ones, mode 04 clears them, mode 09 asks for the VIN. A bike can answer some modes and ignore the rest, and the KTM and Triumph do exactly that.
- UDS. A newer set of questions used by many ECUs from the last decade. We use one read-only question from it, “read this identifier”, to ask the KTM for its part number, software number and VIN. We never send anything that changes the ECU.
The data connector we use speaks Bluetooth LE. That matters because an iPhone cannot talk to a Classic Bluetooth data connector directly. More on phones in Phones, and how the pieces fit in How it works.
Everything is read-only by default. Nothing in the Moto app writes calibration or fuel maps.
Your bike is not here?
Tell us. Write to us from Contact with the make, model, year and, if you know it, what diagnostic plug it has. Adding a bike is quick once someone has seen what it answers. If you have a bike and a data connector and want to help test, say so; a recording at a standstill with the engine running is a good first step.
Back to Moto.
KTM and Triumph are trademarks of their owners; lifelever is not affiliated with them.