Join the waitlistJoin
Life Lever Home

What do you want lifelever to help with?

Not sure? Start with your own AISee all levers

More coming: finance, work, parenting.

Home

How Home works

Home Assistant runs the house. Each day the house's record goes to your lifelever. Your own AI assistant asks it questions.

The parts

  1. Home Assistant talks to the house: valves, plugs, thermostats, the battery, the weather station. It keeps them safe and does the switching. It is free, open and runs on a small computer at home.
  2. The house's own code turns each day into a record: what ran, for how long, what was read inside it, and how each number was got.
  3. Your lifelever keeps that record for good, beside the rest of you.
  4. Your own AI assistant, the one you already use, reads it when you ask a question, and answers from your own record.

This is the same shape as Moto. The bike has a data connector; the house has Home Assistant. A ride is the unit on the road; in the house it is a run.

A run is the house’s ride

Something that was on from one time to another is a run.

A valve run

Start, end, gallons, and the flow readings between.

An appliance cycle

A dishwasher or washer, from its power draw.

A heat pump run

How long it ran, against the temperature outside.

A price period

The peak window, with what was used inside it.

A rain pause

When watering was held, and for how long.

Around the runs, hourly readings for every signal the house reports. Home Assistant keeps full detail for about 10 days and hourly averages after that. Your lifelever keeps what it is sent for good.

Each reading carries how it was got

A house knows some things by measuring and others by working them out. A reading leaves with the name of the way it was got, so your assistant can say “this is estimated from whole-house load” instead of passing off a guess as a measurement. That is the page on how sure a number is.

What is left out on purpose

The house, not the people in it

Who is home, phones, cameras and voice stay in the house. Whole kinds of signal are left out, not a list of names, so a new device of that kind is left out too.

Safety stays in the house

Home Assistant runs the house and keeps its safety rules, always. What you decide, such as a watering schedule, is carried out through Home Assistant and never around it. About profiles.

Answers when asked

There is no model inside lifelever watching your house. Your own assistant answers, and acts, when you ask.

What you need

A house already on Home Assistant

Home needs a Home Assistant you already run. Our pages describe one house. Hardware varies; the questions you can ask depend on what your house reports.

Setup with us

A lifelever piece runs next to Home Assistant and sends each day to your record. In the beta we set it up with you, one house at a time.

Join the waitlist and we will bring you in as it opens. Back to Home.

Bring your house

Years of house history, and schedules you set by chat.

Home needs a Home Assistant you already run. Setup in the beta is assisted: we set it up with you, one house at a time.

Join the waitlist