Join the waitlistJoin
Life Lever Home

What do you want lifelever to help with?

Not sure? Start with your own AISee all levers

More coming: finance, work, parenting.

Home

The radio mesh

One Zigbee mesh does nearly all the work in the house. Thread, Matter and Z-Wave are installed and unused. Bluetooth only listens.

For the curious: you do not need any of this to use a smart plug.

A smart home is several radio networks sharing one small computer. These notes were read from the live house on October 29, 2026, so they say what is running and not what was planned. Back to Home.

At a glance

Radio What it carries here State
Zigbee Valves, plugs, range extenders, outdoor bulbs In use. One mesh, channel 20, 15 devices, all online
Thread Nothing Not in use. No network and no border router
Matter Nothing A server is installed. No devices have been added
Z-Wave Nothing A controller stick is installed. No devices have been added
Bluetooth LE Nothing The computer’s own adapter listens. It hears about 28 nearby devices and connects to none

Everything is controlled from one small computer running Home Assistant.

The Zigbee mesh

One coordinator runs the network: an SMLIGHT SLZB-MR5U, a dual-chip box wired to the network by Ethernet. Only one of its two chips is used, for Zigbee. Home Assistant’s own Zigbee integration talks to it.

Ten devices are routers. They are plugged into the mains, so they can carry other devices’ traffic: four range extenders, four light bulbs and two smart plugs. Five devices are end devices that run on batteries and cannot carry anyone else’s traffic: the watering valves. Each valve attaches to a router near it, and the five use four different routers.

The Zigbee meshOne coordinator in the middle, ten mains powered routers around it each linked to the coordinator and to their neighbours, and five battery valves each attached to a nearby router.Coordinatorchannel 20Range extender (4)Bulb (4)Plug (2)Valve, battery (5)

Solid lines are the links each router has to the coordinator. Dashed lines stand for the links routers have with their neighbours; a router picks its route among them. The diagram is a sketch of the shape and not a map of the house.

What we read from it

  • Every router has a direct link to the coordinator. The mesh is a hub with many cross-links, not a chain.
  • Link quality varies a lot. On a scale where higher is better, the weakest router link reads about a quarter of the scale and the strongest about 90 percent. The weakest are on the driveway side.
  • Areas with Zigbee devices: indoor rooms, the back and front porches, the driveway and the irrigation zone. The coordinator sits in the office.
  • The Zigbee channel is 20. The build plan said 25. The live network is on 20, and the notes now say so.
  • The house runs Home Assistant’s own Zigbee integration. Our early plans named a different Zigbee program, and nothing on the house uses it.

Plaster over metal

The house is old, with thick plaster over metal lath. Our plan assumed that costs 20 to 30 dB for each wall at 2.4 GHz, which is the Zigbee band. That figure is an estimate from the plan, not something we measured. It led to two rules in the plan:

  1. Place the coordinator centrally and high, not in an equipment closet.
  2. Placement beats repeaters. A radio on a sill or dresser at 4 to 5 feet is worth more in a lath house than a stronger antenna. A plug at outlet height behind furniture reads poorly. Buy extenders for the gaps a map of your own mesh shows, not in advance.

A last rule: never put the computer, the coordinator or anything you cannot afford to have switched off on a smart plug.

What happens when routers die

A mesh is only as strong as its routers. One night two plugs went silent, and a valve that depended on them lost its only way onto the network. It had good signal and no parent. The story is worth reading before you place a valve.

The five valves are spread over four routers, and two of them share one range extender. We have not recorded whether each valve has a second router to fall back on, which is the thing that mattered that night.

Thread, Matter and Z-Wave

Thread

The coordinator's second chip could serve as a Thread border router. Nothing uses it. Whether Thread is wanted is undecided, and changing a live coordinator is not done lightly.

Matter

A Matter server is installed. It has no devices, because the thermostats it was installed for were never installed.

Z-Wave

A SONOFF Z-Wave stick in the computer's USB port acts as the controller. It has no devices paired.

Bluetooth

The computer’s own Bluetooth adapter is powered and scanning in passive mode. A Bluetooth radio hears every advertisement in range, so the 28 devices it hears are mostly not ours. It connects to none of them.

One adapter in a small computer covers a radius, not a whole property. If a specific Bluetooth device ever needs coverage the adapter cannot reach, the answer is a small relay that forwards advertisements over Wi-Fi. We have not needed one.

Devices that are not on a radio

Some devices do not use any of these. The thermostats reach the house over a cloud service and over the home network, and the appliances reach it through their makers’ clouds. See devices.

Ask your assistant

Which of my devices has only one route back to the coordinator?

That is the question that would have saved a valve. The answer comes from Home Assistant's device list.

Bring your house

Years of house history, and schedules you set by chat.

Home needs a Home Assistant you already run. Setup in the beta is assisted: we set it up with you, one house at a time.

Join the waitlist