For the curious: you do not need any of this to know whether it rained.
Back to devices.
At a glance
| Item | What we found |
|---|---|
| Gateway | Ecowitt GW1100B, with its own indoor readings |
| Outdoor sensor | Ecowitt WH26: temperature and humidity, in the front yard |
| Rain gauge | Ecowitt, paired in early October 2026 |
| Fallback | A National Weather Service station and a weather service |
| Used for | Outside temperature, indoor averages, and the rain delay |
Prefer the instrument, fall back to a station
The outside temperature is a short ranked list: the local sensor first, the station second. The reading carries a note naming which rung answered, so a fallback cannot happen without you seeing it. The failure to avoid is a number quietly reverting to a forecast model’s.
The first hour tells you nothing
When we put the outdoor sensor up, the house recorded a ten degree gap against the weather service and we called it a win for the local instrument. It was not. The sensor had been carried outside from indoors and was shedding the warmth it had brought with it. A reading from an instrument in its first hour measures the instrument settling, not the world.
The same applies to the rain gauge. Give a new instrument time before you believe it. We wrote the correction into our notes the same evening.
What the indoor readings are
The gateway’s console reports indoor temperature, humidity and pressure. Those join the average for the zone they sit in. Some devices report an internal chip temperature that looks like a room reading. A radio coordinator reported about 108 degrees F once. We do not use those as room temperatures.
Ask your assistant
How much did it rain last month, and how many days did the rain delay hold watering?
Your assistant reads the gauge and the pauses from your record. Until the gauge has some history, it says what it does not have.